OPS HubOPS Academy · free for everyone Sign in

Vehicle tracker fitting

Fit an OPS Track GPS tracker in a customer's vehicle so they can see it live and get theft alerts.

Overview

Trackers report position over OPS Mobile. With no signal the unit stores positions and sends them later. Mini units plug into a fuse tap; Pro units are hard-wired with external antennas, a backup battery, ignition/door inputs and an immobiliser relay. The job is checked by a tracker you installed after accepting.

Jobs this covers

track_install — certificate: Vehicle tracker fitting (required)

The equipment — what everything does

OPS Track Mini

Plug-and-play unit on a fuse tap, internal antennas, no backup battery.

In game: /towers → OPS Track → Install a tracker, sitting in the vehicle.

OPS Track Pro

Hard-wired with antennas, 48 h backup battery, inputs and immobiliser.

In game: Same menu, choose Pro and follow the steps under the dash.

LEDs (PWR / GNSS / GSM)

Show power, satellite fix and mobile signal.

In game: /towers → OPS Track → Check the tracker.

Tools & PPE

Multimeter / voltage tester

Proves a circuit is dead before you touch it, and measures voltage, continuity and resistance.

Cordless drill & fixings

Drills walls for cable entry and fixes brackets, cameras and boxes with the right plugs and screws.

Engineer laptop & console cable

Configures routers, NVRs and servers, runs speed tests and opens OPS Hub.

Insulated gloves PPE

Rated gloves for work near live electrical parts and for sharp metal edges.

Standalone servers: tools are in your van (OPS Work → My van & tools). Items servers: collect them — and the job’s parts — at an OPS depot.

Step by step

1
Sit in the vehicle

Get in the customer's vehicle with the engine off.

Customer's vehicle inspect
2
Find a hidden spot

Behind the dash, away from the airbags.

Under the dash kneel
3
Fit the unit

/towers → OPS Track → Install a tracker. Choose Mini or Pro and follow each step.

Cordless drill & fixings Under the dash kneel
4
Check the LEDs

Check the tracker: PWR, GNSS fix and GSM signal should all be on.

Multimeter / voltage tester /towers → OPS Track → Check test
5
Complete

Press Check on the job.

OPS Work → the job phone

Health & safety

Vehicle electrics

Risk: Shorting a battery feed can cause fire.

Control: Use a fused tap and disconnect before hard-wiring.

Airbags

Risk: Wiring near airbags can set them off.

Control: Keep clear of airbag modules and their yellow connectors.

In game you confirm these in a risk assessment before starting. Skipping them on risky work can cause a fall or a shock — and it’s logged as a safety incident.

When it’s not done correctly

Fitted by someone else, or before accepting

The check needs a tracker installed by you after accepting.

Unit with no GSM signal

It can't report live — it stores positions until it gets signal.

Immobiliser wired wrongly

The customer's car won't start — a complaint and a callout.